| |
SYSTEM FEATURES
Speaker system:
- 118 dBc at 100' (30m)
- Tone coverage: 5,600' (1700m)
- Voice coverage: 2,800' (850m)
- One directional speaker
- One 400 watt speaker driver designed for outdoor warning
- 50' (15m) speaker cable included
Type I Electronics Cabinet:
- Two compartment natural finish aluminum
- Six standard warning tones
- PA function
- Local control push buttons
- One 400 watt power amplifier
- Electronic siren controller
- Tone generator
- Timer
- AC temperature compensated 5 amp battery charger
- Battery switch
- Battery tray
- Low battery alarm
- SI TEST®
SYSTEM OPTIONS
BSETHOR – Delphi BE06020M Batteries
WPSNCMIC – Noise Cancelling Microphone
RDVM – Digital Voice Message Capability
STATUS – Cabinet Window LED Status Indicator
INTRU – Intrusion Alarm (available with Two-Way only)
SBC240, SCB260 – Solar Power
SIREN ACTIVATION CONTROLS
Our VHF High and UHF Siren Activation Control Packages Include the Following:
Radio and Radio Interface
Tone Squelch
2-3dB Gain Omni-Directional Antenna with Bracket
35' of RG58 Antenna Cable
Polyphaser
SI TEST®
Low Battery Alarm (Two-Way Only)
ONE-WAY CONTROLS
AUXIN – Auxiliary Board for Contact Closure Activation
D2020LL – 10 Digit DTMF Landline Activation
D2020H – 10 Digit DTMF VHF High Band / 150-170 Mhz
D2020U – 10 Digit DTMF UHF / 450-470 Mhz
WPSTT – Two Tone Sequential Option
TWO-WAY CONTROLS
AUXCS – Two-Way Contact Closure Activation and Status Board
C2020LL – 10 Digit DTMF Two-Way Landline Activation
C2020H – 10 Digit DTMF VHF High Band / 150-170 Mhz
C2020U – 10 Digit DTMF UHF / 450-470 Mhz
SPECIFICATION DATA
ELECTRICAL
Battery Charger Input: 240/120VAC, 50/60Hz, 3A fuse
Battery Charger Output: 28VDC, 5A
Batteries: (2) 12V, 60AH lead calcium
Standby Current: 40mA, 24VDC
Operating Current: 22A, 24VDC
Power Amplifier Output Power: 400 Watts
ENVIRONMENTAL
Operating Temperature: -35C to +60C
Storage Temperature: -65C to +125C
Humidity, Non Condensing: 0 to 95% |
